BS EN 10028-1 2000
|
ID： |
2C570E350BFD40B3A9AB008E3537CEB2 |
|
文件大小(MB)： |
0.31 |
|
页数： |
24 |
|
文件格式： |
|
|
日期： |
2013-6-1 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,10028-1:2000,Incorporating,Amendment No. 1,Flat products made of,steels for pressure,purposes —,Part 1: General requirements,The European Standard EN 10028-1:2000, with the incorporation of,amendment A1:2002, has the status of a British Standard,ICS 77.140.30, , ,,,,, , ,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue Aug 29 10:51:45 BST 2006, Uncontrolled Copy, (c) BSI,BS EN 10028-1:2000,This British Standard, having,been prepared under the,direction of the Engineering,Sector Committee, was,published under the authority,of the Standards Committee,and comes into effect on,15 July 2000,. BSI 3 March 2003,ISBN 0 580 35683 3,National foreword,This British Standard is the official English language version of,EN 10028-1:2000, including amendment A1:2002. It supersedes,BS EN 10028-1:1993 which is withdrawn.,The start and finish of text introduced or altered by amendment is indicated in,the text by tags . Tags indicating changes to CEN text carry the number,of the CEN amendment. For example, text altered by CEN amendment A1 is,indicated by .,The UK participation in its preparation was entrusted by Technical Committee,ISE/73, Steels for pressure purposes, to Subcommittee ISE/73/2, Steel plates,and bars for pressure purposes, which has the responsibility to:,A list of organizations represented on this subcommittee can be obtained on,request to its secretary.,Cross-references,The British Standards which implement international or European,publications referred to in this document may be found in the BSI Catalogue,under the section entitled “International Standards Correspondence Index”, or,by using the “Search” facility of the BSI Electronic Catalogue or of British,Standards Online.,This publication does not purport to include all the necessary provisions of a,contract. Users are responsible for its correct application.,Compliance with a British Standard does not of itself confer immunity,from legal obligations.,— aid enquirers to understand the text;,— present to the responsible European committee any enquiries on the,interpretation, or proposals for change, and keep the UK interests,informed;,— monitor related international and European developments and,promulgate them in the UK.,Summary of pages,This document comprises a front cover, an inside front cover, the EN title page,pages 2 to 20, an inside back cover and a back cover.,The BSI copyright date displayed in this document indicates when the,document was last issued.,Amendments issued since publication,Amd. No. Date Comments,14284 3 March 2003 See national foreword,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue Aug 29 10:51:45 BST 2006, Uncontrolled Copy, (c) BSI,Page,EN 10028-1:2000,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 10028-1,April 2000,+ A1,November 2002,ICS 77.140.30; 77.140.50 Supersedes EN 10028-1:1992,English version,Flat products made of steels for pressure purposes - Part 1:,General requirements,(includes amendment A1:2002),Produits plats en aciers pour appareils à pression - Partie 1:,Prescriptions générales,(inclut l'amendement A1:2002),Flacherzeugnisse aus Druckbeh鋖terst鋒len - Teil 1:,Allgemeine Anforderungen,(enth鋖t 膎derung A1:2002),This European Standard was approved by CEN on 29 October 1999. Amendment A1 was approved by CEN on 16 October 2002.,CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European,Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national,standards may be obtained on application to the Central Secretariat or to any CEN member.,This European Standard exists in three official versions (English, French, German). A version in any other language made by translation,under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official,versions.,CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.,EUROPEAN COMMITTEE FOR STANDARDIZATION,COMITé EUROPéEN DE NORMALISATION,EUROP腎SCHES KOMITEE FüR NORMUNG,Central Secretariat: rue de Stassart, 36 B-1050 Brussels,. 2000 CEN All rights of exploitation in any form and by any means reserved worldwide,for CEN national Members.,Ref. No. EN 10028-1:2000 + A1:2002 E,Licensed Copy: Institute Of Techno……
……